Top Stitching Tips

Top Stitching Tips

1. The upper suture is heavier than traditional suture; You put this thread on the top of the machine and use your regular sewing thread in the bobbin.

2. 90/14 - special needle for top seams; it has a larger eye to accommodate thicker filament.

3. Your stitch line should be slightly longer than the bridging stitch when you embroider from above.

4. Sometimes your project may work better with a different thread and sewing needle; make sure you choose your needle wisely.

5. Consider going outside of the yarn matching field with a fun contrasting color - this can bring a lot of fun and surprise to your finished project.

6. Take your time and test a piece of fabric first. Make sure you use the same number of layers in your test pattern as you did in your finished project, and test several different threads, needles, and stitch types / lengths before deciding on the real Stitch Australia deal.

7. Trample on knitwear is difficult. It is important not to have wavy / wrinkled seams. One way to avoid this is to use a twin knit needle.

8. The spacing between lines is very important when sewing. Consider using a guiding foot for consistency.

9. Depending on the thickness of the fabric layers, the tension may need to be adjusted. This is especially important with jeans / jeans. Again, it's always important to make a test sample first.

10. If you are using thicker fabric or many layers, place a little scrap of fabric under the back of the presser foot before sewing. This allows the presser foot to remain straight, horizontally, so that it does not have to “go uphill” to start sewing the garment.

11. Don't back down - at least not in the traditional way. Instead of sewing back and forth several times to start and end the stitch, first shorten the stitch length to something very short; back and forth only once, then lengthen the seams and sew as usual. This creates a thinner way to secure your seams.

12. When you are finished sewing, pull the upper threads at the bottom or back of the work and tie them into a knot with the lower threads, then cut.

13. Try on any garment before embroidering. Removing seams is much more difficult than removing traditional seams.

14. If possible, save all lines until the end of the project. This way, you only need to change the thread, needle and stitch settings once instead of going from traditional stitching to embroidery on top.

Online discount  needle store

15. Stabilize fabrics as needed. Use a starch spray to stabilize stretch or delicate fabrics before sewing. Another option is to add a layer of blend between the layers of fabric, or use a tear-off stabilizer under the fabric and then tear it off when you're done sewing.

16. Add a cord for extra impact. If you really want your stitches to stand out, place a piece of mother-of-pearl cotton where you want the stitches to go, and then sew the lace with a narrow zigzag to hold it in place.

17. Trim seam allowances before sewing. This reduces the bulk of the fabric under the seams, making it easier to achieve a smooth, even finish.

18. Step out of the box and experiment with your decorative stitches!

19. Make sure the fabric you choose is suitable for the pattern or style you are making. Suggestions for fabric on the back of an envelope may be helpful, and look for similar styles and fabrics. This is a skill that you will also learn in practice.

20. Don’t feel like you need to make everything. Sew things that are at your skill level and that you feel comfortable doing. And then wear them with the items you've purchased to make your wardrobe look less homey (in a bad way).

21. Study clothing in stores, in your closet, in Online discount store, and in museums to learn how it was constructed and to get ideas to improve your own sewing.

22. Pay attention to current fashion so you stay up-to-date. Fashion changes over time, and your eye will change as well. Even classics need to be tweaked to look current.

Read More....